Connecting Rods with L19 Bolts ZRP for Ford Duratec 2.0L 16v 146.25mm x 21mm
641,38 €
Ford 2.0L Duratec H-Beam Connecting Rods are manufactured from 4340 high tensile steel and are designed for high performance and extreme durability. This design combines lightweight performance with proven reliability at an extended rpm. The bushings are made from Aluminum – silicon/ bronze Aluminum – silicon/ bronze material and have radial groove acting as an oil reservoir. These rods have “Ribbed pin end” that minimizes pin end distortion under heavy inertial loads while saving excess weight. They are shot peened to relieve stress from the material and multi-stage heat treated to increase rigidity. The tight tolerances in the production process, ensure a perfect fitment while optimizing the oil clearances. Bend and twist is tightly controlled.
Each rod includes ARP 2000 cap fasteners that are rated at 220,000psi, optional ARP L19 material 260.00psi available as an upgrade and the whole kit is supplied with ARP moly and full fitting instructions.
Additional machining processes
- Dowel sleeves for perfect fit and accurate re-assembling
- Lipped Cap Relief for improved big-end integrity at extreme application
- Grooves in Thrust Face for weight reduction
Technical Features of ZRP Connecting Rods
- Two-Piece forging for great strength
- Shot Peening for improved fatigue life
- Magnaflux Inspection guarantees that the consistency of the forged material meets our high-quality standard
- Double ribbed caps for added support
- Multi Stage Heat Treatment for maximum strength, dimensional stability, and fatigue life.
- CNC machining for superior tolerances, precise as much as 0.0002″
- Center to center is maintained under .001″ tolerance
- Finite Element Analysis (FEA) Computer generated stress analysis of con rods
- Optimal balancing for weight matched sets of ± 1gram
Additional information
| Engine Nr |
CJBA, AOWA, AOBA, N4JA, N4JB |
|---|---|
| Application |
2.0L Duratec |
| Notes |
– |
| Bolt Size |
3/8″ |
| Shape |
H-Beam |
| Length (CC) |
146.25 |
| Pin Size |
21.00 |
| Big Bore |
50.023 |
| B.E Width |
21.82 |
| Weight Gr. |
456 |
| Set of |
4 |
| Fastener Grade |
ARP2000 |
| Series |
Standard Series |
| Weight |
456 |
Ford 2.0L Duratec H-Beam Connecting Rods are manufactured from 4340 high tensile steel and are designed for high performance and extreme durability. This design combines lightweight performance with proven reliability at an extended rpm. The bushings are made from Aluminum – silicon/ bronze Aluminum – silicon/ bronze material and have radial groove acting as an oil reservoir. These rods have “Ribbed pin end” that minimizes pin end distortion under heavy inertial loads while saving excess weight. They are shot peened to relieve stress from the material and multi-stage heat treated to increase rigidity. The tight tolerances in the production process, ensure a perfect fitment while optimizing the oil clearances. Bend and twist is tightly controlled.
Each rod includes ARP 2000 cap fasteners that are rated at 220,000psi, optional ARP L19 material 260.00psi available as an upgrade and the whole kit is supplied with ARP moly and full fitting instructions.
Additional machining processes
- Dowel sleeves for perfect fit and accurate re-assembling
- Lipped Cap Relief for improved big-end integrity at extreme application
- Grooves in Thrust Face for weight reduction
Technical Features of ZRP Connecting Rods
- Two-Piece forging for great strength
- Shot Peening for improved fatigue life
- Magnaflux Inspection guarantees that the consistency of the forged material meets our high-quality standard
- Double ribbed caps for added support
- Multi Stage Heat Treatment for maximum strength, dimensional stability, and fatigue life.
- CNC machining for superior tolerances, precise as much as 0.0002″
- Center to center is maintained under .001″ tolerance
- Finite Element Analysis (FEA) Computer generated stress analysis of con rods
- Optimal balancing for weight matched sets of ± 1gram
Additional information
| Engine Nr |
CJBA, AOWA, AOBA, N4JA, N4JB |
|---|---|
| Application |
2.0L Duratec |
| Notes |
– |
| Bolt Size |
3/8″ |
| Shape |
H-Beam |
| Length (CC) |
146.25 |
| Pin Size |
21.00 |
| Big Bore |
50.023 |
| B.E Width |
21.82 |
| Weight Gr. |
456 |
| Set of |
4 |
| Fastener Grade |
ARP2000 |
| Series |
Standard Series |
| Weight |
456 |
ENVÍOS RÁPIDOS Y SEGUROS
Realizamos envíos a toda la Península, Islas Baleares, Islas Canarias, Ceuta y Melilla. Trabajamos con la empresa de transporte GLS para garantizar que tu pedido llegue en perfectas condiciones.
PLAZOS DE ENTREGA Y CONDICIONES
- Península: Entrega en 24/48 horas para productos en stock.
- Islas: El plazo estimado es de 4 a 5 días.
- Recogida en tienda: Si lo prefieres, puedes seleccionar la opción de recogida en nuestra tienda física.
Ten en cuenta que el coste del envío se calcula en función de cada pedido. Para envíos a las Islas Canarias, Ceuta y Melilla, no se aceptan devoluciones y no nos hacemos responsables de posibles retrasos en aduanas o transporte.
Cualquier incidencia debe ser comunicada en un plazo máximo de 15 días naturales desde la recepción del paquete.
