Roll Over Valve, 10AN ORB to 0.75in Barb Radium Engineering
35,42 €
This fitting should always be mounted in the vertical upright position (shown below). In this condition, air flow is permitted to move through the unit in both directions (in and out).
However, when the fitting rotates more than 90 degrees, it becomes a shut-off valve not allowing any flow to pass through.
This part was designed to be compatible with Radium Engineering P/N: 18-0042 AIR FILTER, 0.75IN ID. This combination is most commonly used with engine (or oil catch can) vents. It permits venting but prevents oil from escaping the engine if the vehicle is accidentally inverted.
SPECIFICATIONS
Threads: 7/8-14 UNF (10AN ORB)
Barb (OD): 0.75″ (19mm)
Material (valve): Stainless Steel
Material (retaining ring): Stainless Steel
Material (o-ring): FKM
Material (body): 6061 Auminum
Surface (body): Type-II Anodized
This fitting should always be mounted in the vertical upright position (shown below). In this condition, air flow is permitted to move through the unit in both directions (in and out).
However, when the fitting rotates more than 90 degrees, it becomes a shut-off valve not allowing any flow to pass through.
This part was designed to be compatible with Radium Engineering P/N: 18-0042 AIR FILTER, 0.75IN ID. This combination is most commonly used with engine (or oil catch can) vents. It permits venting but prevents oil from escaping the engine if the vehicle is accidentally inverted.
SPECIFICATIONS
Threads: 7/8-14 UNF (10AN ORB)
Barb (OD): 0.75″ (19mm)
Material (valve): Stainless Steel
Material (retaining ring): Stainless Steel
Material (o-ring): FKM
Material (body): 6061 Auminum
Surface (body): Type-II Anodized
ENVÍOS RÁPIDOS Y SEGUROS
Realizamos envíos a toda la Península, Islas Baleares, Islas Canarias, Ceuta y Melilla. Trabajamos con la empresa de transporte GLS para garantizar que tu pedido llegue en perfectas condiciones.
PLAZOS DE ENTREGA Y CONDICIONES
- Península: Entrega en 24/48 horas para productos en stock.
- Islas: El plazo estimado es de 4 a 5 días.
- Recogida en tienda: Si lo prefieres, puedes seleccionar la opción de recogida en nuestra tienda física.
Ten en cuenta que el coste del envío se calcula en función de cada pedido. Para envíos a las Islas Canarias, Ceuta y Melilla, no se aceptan devoluciones y no nos hacemos responsables de posibles retrasos en aduanas o transporte.
Cualquier incidencia debe ser comunicada en un plazo máximo de 15 días naturales desde la recepción del paquete.
