VIS Motorsport – 2.0 TSI / TFSI EA888 Gen 3 HPFP Upgraded Kit
354,14 €
Modification of the 2.0 TSI / TFSI EA888 Gen 3 engines far beyond OEM power levels requires an additional volume of high-pressure fuel in order to avoid «fuel cuts» especially in the midrange.
In many cases we see the factory fuel pump begin to suffer from pressure loss.
The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.
This upgrade replaces the internal parts that are responsable for pressure and volume of fuel that reaches your injectors to meet the demands that come for higher power.
Tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.
The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.
CMM coordinate measuring machine is a device for measuring the physical geometrical characteristics of an object and used here with success.
It comes with fully detailed instructions including step by step fitting images including all necessary components and a detailed install sheet to get the job done.
*For up to 600 – 650 hp
Modification of the 2.0 TSI / TFSI EA888 Gen 3 engines far beyond OEM power levels requires an additional volume of high-pressure fuel in order to avoid «fuel cuts» especially in the midrange.
In many cases we see the factory fuel pump begin to suffer from pressure loss.
The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.
This upgrade replaces the internal parts that are responsable for pressure and volume of fuel that reaches your injectors to meet the demands that come for higher power.
Tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.
The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.
CMM coordinate measuring machine is a device for measuring the physical geometrical characteristics of an object and used here with success.
It comes with fully detailed instructions including step by step fitting images including all necessary components and a detailed install sheet to get the job done.
*For up to 600 – 650 hp
ENVÍOS RÁPIDOS Y SEGUROS
Realizamos envíos a toda la Península, Islas Baleares, Islas Canarias, Ceuta y Melilla. Trabajamos con la empresa de transporte GLS para garantizar que tu pedido llegue en perfectas condiciones.
PLAZOS DE ENTREGA Y CONDICIONES
- Península: Entrega en 24/48 horas para productos en stock.
- Islas: El plazo estimado es de 4 a 5 días.
- Recogida en tienda: Si lo prefieres, puedes seleccionar la opción de recogida en nuestra tienda física.
Ten en cuenta que el coste del envío se calcula en función de cada pedido. Para envíos a las Islas Canarias, Ceuta y Melilla, no se aceptan devoluciones y no nos hacemos responsables de posibles retrasos en aduanas o transporte.
Cualquier incidencia debe ser comunicada en un plazo máximo de 15 días naturales desde la recepción del paquete.
